The 11 Greatest Nuts, Ranked

tagsHorizontal Type Fine Wire Drawing Machine

Those obsessed with editing will choose every product we review. If you buy from the link, we may earn a commission.

There are a lot of nuts there. These are the best.

The bolt always wins glory, but the nut is the real star. It can be round or square, winged or jagged, easy to remove or impossible to remove. Since the 15th century or so, it has been adapted to hundreds of applications. It brings together everything from bridges to bicycles. It owns our

together. These are its best versions.

The nut that secures the trap to the bottom of the sink. Make cleaning a breeze. Although we are hesitant to tell people to use pliers to remove any nuts, the purpose of the pliers is to loosen or tighten them with pliers or adjustable wrenches. Like all threaded plumbing fittings, the slip nut should not be overtightened, especially if it is made of plastic. When you buy one of these in a small plastic bag, you may see abbreviations or similar words on TPFT 1.5. This means tightening the fittings with pliers or wrenches, "hand tighten one and a half turns." Therefore, always slide the sliding nut upwards by hand until it is tightened. Then use pliers or a wrench to tighten it completely, and turn it one or two more turns, but don't turn it any more.

It seems purely decorative, but it is designed to accept split pins to lock it in place. The pin passes through the hole on the bolt, through the slot on the nut, and then each half of the pin is bent in the opposite direction on the nut. It is a beautiful and simple design that can lock the fasteners in place after tightening the fasteners correctly. Now, there are other ways to lock the nut in place, such as proprietary adhesives and nuts with nylon bushings, but toothed nuts (also called lock nuts) are still used in many applications. Most importantly, especially when the technician may need quick operation, it can be seen to indicate that the nut has been locked in place. The lack of a split pin will indicate a possible problem.

There are several good reasons to use flange nuts with built-in nuts and washers. First of all, it is convenience. By eliminating the washer under the nut, you can reduce the loss or worry. But the second is tightness. When you use a nut with a washer, two bearing surfaces are created: one between the nut and the washer, and the other between the washer and the bolt connection surface. It’s no big deal, right? wrong. For mission-critical bolt assemblies, the excess bearing surface may be an opportunity for one metal surface to wear another metal surface, causing the nut to loosen. Using flange nuts, especially high-quality flange nuts, reduces the number of bearing surfaces by half and increases the chance that the nut remains tight. The final case of using flange nuts is that a strong flange helps support the first pair of threads in the nut, thereby forming a unified assembly when the nut is tightened. Again, this helps the nut to secure, which is exactly what you want.

Gifted nuts. Ideal for hard-to-reach areas. These look good and work well in applications where the nuts must be loosened frequently. Most of them are cast, but the heavy-duty version is finally cast for strength and impact resistance. In many applications, you need such precision fasteners. Suppose you want to build parts that need to be assembled and disassembled quickly. Suppose that sometimes nuts and bolts are separated by clumsy obstacles. It may be difficult to reach for the nut with a wrench. However, when using the handle nut, you can hold the nut in place, slide the bolt in and tighten the bolt, while holding the handle of the handle nut.

The cover prevents the threads from being scratched. We can find nuts for you. This is a perfect decoration choice, the chrome-plated variety is the same as the "high crown" type with an oval high dome, adding extra "technical" quality to the project. The lock nut not only protects us from the exposed bolt, but also covers the end of the bolt, preventing it from being damaged, corroded, contaminated by paint and countless other substances that can stain the threads and make the nut difficult to remove.

Old-fashioned, unlike the hexagonal nut, it has a longer supporting surface that can be used for wrench jaws. The disadvantage of the centuries-old design is that its flat surface cannot be accessed for disassembly and tightening. In addition, only open-end wrenches, adjustable wrenches or eight-point sockets can be used on these tools.

You can only put them on or remove them using tools called "Trident" or "Trident" sockets. No, you will not find these products in your local hardware store. If you want to prevent your children from breaking down something, but you can also stop people with more evil intentions, then this is a good choice. Thieves are known to unlock things when defeated by a lock. Anti-tamper nuts can provide an extra measure of safety protection.

Wildcard! Strip the ends of the wires; arrange them in parallel and twist one of them to ensure a safe and reliable electrical connection. Just make sure that the wires you want to connect are of the correct size, otherwise there is a risk of fire. The correct size is determined by the manufacturer, who will list the data on the wire connector packaging. Although all these products are usually referred to as informal wire nuts, this is actually incorrect. Wire nuts are the pioneers of this category. This is a trademark term owned by Ideal Industries.

Stamped sheet steel wing nuts (called Ds in the wing nut industry) are the cheapest. Cold forged stainless steel, commonly referred to as Type A, is stronger and looks better. When you are not tightening these nuts by hand, it is said that you need a pair of pliers, be careful. When you apply too much force, the cheap cast version will suddenly snap. Never strike the wing with a hammer to tighten any version. This is a quick way to tighten or damage fasteners quickly.

You say to someone: "Give the nut a name" and they will blurt out "Hexagon nuts!" Like bolts, hexagon nuts are made of many materials, such as ordinary carbon steel and brass, and they can be plated. Cover or use ordinary steel surface treatment. Their intensity changes accordingly. Gardening nuts can withstand tens of thousands of pounds of force, while high-strength nuts can withstand more than 100,000 pounds of tension (pull force). That is a very strong nut.

The king of nuts. It is important to make it match the wheel, whether in size or on the base of the nut, the bottom of the nut is designed to engage the wheel in a specific way. If you get it wrong, you will strip off the stud on which the nut is installed, or risk the nut loosening, which may cause disaster at high speeds. To properly adjust the lug nut on the wheel, use a torque wrench. This

Articles on this subject belong to Mike Allen, who is today's automatic editor. Of course, if you are on the side of the road, please use a cross wrench or the wrench that comes with the car to tighten the lug nuts, which is good. When you get home, please double check the lug nut tightening procedures described by Mike in his seminal article "Torque Wrench 101: How to Get the Right Power". This is a classic work in DIY and industrial literature.

WhatsApp Online Chat !